You are here: Home > Magnetic Contactors > Lighting Contactors > Asco
Sort By:
Page of 1
ASCO 918 10 Pole ASCO 918 10 Pole

ASCO Series 918 Remote Control Lighting Contactor (RC), Open type When placing your order specify the following voltages: ASCO Cat# 918102031 110v to 120v ASCO Cat# 918102061 208v to 240v ASCO Cat# 918102071 265v to 277v POLES: 10 Electrical Features * UL Listed, CSA approved. * Rated 30 amperes to 600 volts AC for General Purpose and Standard Ballast loads * Rated 20 ampres to 600 volts AC for Electronic Ballast and Tungsten Loads. * Coils available in ratings from 110 through 277 volts. * No derating when used open or enclosed. * Withstand current ratings: 22,000 amps at 250 volts, 60 Hz; 14,000 amps at 480 volts, 60 Hz; 10,000 amps at 600 volts, 60 Hz. * Available with DC ratings to 250 VDC. * Rated for 1-1/2 horsepower at 120 VAC. * Interrupts 300% rated current at 0.4 to 0.5 power factor. Construction Features * Accommodates 2 to 12 poles (contacts). * Optional 2, 4 and 6 pole contact blocks available for field modifications. * Optional integrally-mounted, solid-state modules allow control directly from energy management systems programmable controllers, photocells, timers, occupancy sensors, microprocessors and communications systems. * Single-solenoid, by-directional operating mechanism. * Mechanically held, electrically operated with contacts power-driven to open and closed positions. * Optional auxiliary single-pole, double-throw contacts provide contact status. * Visual position indicators show open/closed position of each main contact. * Only 4" stud-construction walls. * No extra wires or contacts needed for signal lamps. * Line, load and control terminals accept No. 18 to No. 10 AWG. wire. Terminal plates rise with the screws for fast termination. * Three-point mounting for fast, easy installation.

ASCO 918 12 Pole ASCO 918 12 Pole

ASCO Series 918 Remote Control Lighting Contactor (RC), Open type When placing your order specify the following voltages: ASCO Cat# 918102031 110v to 120v ASCO Cat# 918102061 208v to 240v ASCO Cat# 918102071 265v to 277v POLES: 12 Electrical Features * UL Listed, CSA approved. * Rated 30 amperes to 600 volts AC for General Purpose and Standard Ballast loads * Rated 20 ampres to 600 volts AC for Electronic Ballast and Tungsten Loads. * Coils available in ratings from 110 through 277 volts. * No derating when used open or enclosed. * Withstand current ratings: 22,000 amps at 250 volts, 60 Hz; 14,000 amps at 480 volts, 60 Hz; 10,000 amps at 600 volts, 60 Hz. * Available with DC ratings to 250 VDC. * Rated for 1-1/2 horsepower at 120 VAC. * Interrupts 300% rated current at 0.4 to 0.5 power factor. Construction Features * Accommodates 2 to 12 poles (contacts). * Optional 2, 4 and 6 pole contact blocks available for field modifications. * Optional integrally-mounted, solid-state modules allow control directly from energy management systems programmable controllers, photocells, timers, occupancy sensors, microprocessors and communications systems. * Single-solenoid, by-directional operating mechanism. * Mechanically held, electrically operated with contacts power-driven to open and closed positions. * Optional auxiliary single-pole, double-throw contacts provide contact status. * Visual position indicators show open/closed position of each main contact. * Only 4" stud-construction walls. * No extra wires or contacts needed for signal lamps. * Line, load and control terminals accept No. 18 to No. 10 AWG. wire. Terminal plates rise with the screws for fast termination. * Three-point mounting for fast, easy installation.

ASCO 918 8 Pole ASCO 918 8 Pole

ASCO Series 918 Remote Control Lighting Contactor (RC), Open type When placing your order specify the following voltages: ASCO Cat# 918102031 110v to 120v ASCO Cat# 918102061 208v to 240v ASCO Cat# 918102071 265v to 277v POLES: 8 Electrical Features * UL Listed, CSA approved. * Rated 30 amperes to 600 volts AC for General Purpose and Standard Ballast loads * Rated 20 ampres to 600 volts AC for Electronic Ballast and Tungsten Loads. * Coils available in ratings from 110 through 277 volts. * No derating when used open or enclosed. * Withstand current ratings: 22,000 amps at 250 volts, 60 Hz; 14,000 amps at 480 volts, 60 Hz; 10,000 amps at 600 volts, 60 Hz. * Available with DC ratings to 250 VDC. * Rated for 1-1/2 horsepower at 120 VAC. * Interrupts 300% rated current at 0.4 to 0.5 power factor. Construction Features * Accommodates 2 to 12 poles (contacts). * Optional 2, 4 and 6 pole contact blocks available for field modifications. * Optional integrally-mounted, solid-state modules allow control directly from energy management systems programmable controllers, photocells, timers, occupancy sensors, microprocessors and communications systems. * Single-solenoid, by-directional operating mechanism. * Mechanically held, electrically operated with contacts power-driven to open and closed positions. * Optional auxiliary single-pole, double-throw contacts provide contact status. * Visual position indicators show open/closed position of each main contact. * Only 4" stud-construction walls. * No extra wires or contacts needed for signal lamps. * Line, load and control terminals accept No. 18 to No. 10 AWG. wire. Terminal plates rise with the screws for fast termination. * Three-point mounting for fast, easy installation.

ASCO 918 6 Pole ASCO 918 6 Pole

ASCO Series 918 Remote Control Lighting Contactor (RC), Open type When placing your order specify the following voltages: ASCO Cat# 918102031 110v to 120v ASCO Cat# 918102061 208v to 240v ASCO Cat# 918102071 265v to 277v POLES: 6 Electrical Features * UL Listed, CSA approved. * Rated 30 amperes to 600 volts AC for General Purpose and Standard Ballast loads * Rated 20 ampres to 600 volts AC for Electronic Ballast and Tungsten Loads. * Coils available in ratings from 110 through 277 volts. * No derating when used open or enclosed. * Withstand current ratings: 22,000 amps at 250 volts, 60 Hz; 14,000 amps at 480 volts, 60 Hz; 10,000 amps at 600 volts, 60 Hz. * Available with DC ratings to 250 VDC. * Rated for 1-1/2 horsepower at 120 VAC. * Interrupts 300% rated current at 0.4 to 0.5 power factor. Construction Features * Accommodates 2 to 12 poles (contacts). * Optional 2, 4 and 6 pole contact blocks available for field modifications. * Optional integrally-mounted, solid-state modules allow control directly from energy management systems programmable controllers, photocells, timers, occupancy sensors, microprocessors and communications systems. * Single-solenoid, by-directional operating mechanism. * Mechanically held, electrically operated with contacts power-driven to open and closed positions. * Optional auxiliary single-pole, double-throw contacts provide contact status. * Visual position indicators show open/closed position of each main contact. * Only 4" stud-construction walls. * No extra wires or contacts needed for signal lamps. * Line, load and control terminals accept No. 18 to No. 10 AWG. wire. Terminal plates rise with the screws for fast termination. * Three-point mounting for fast, easy installation.